Your cart is currently empty!
Bitmain Antminer S21 XP Hyd Bitcoin Miner 473TH/s | BT-MINERS
$12,399.00
S21 XP Hyd Description Introducing the Antminer S21 XP Hydro, Bitmain’s latest water-cooled Bitcoin mining powerhouse. Designed for efficiency, it achieves an impressive 473Th/s hashrate with a power consumption of 5670W, running on the SHA-256 algorithm. With an outstanding efficiency of 12J/T, this miner is perfect for maximizing cryptocurrency mining operations. Elevate your mining setup with the Antminer S21 XP Hydro and lead in the competitive world of crypto mining.
Description
Antminer S21 XP Hyd Description
Model Antminer S21 XP Hyd (473Th) from Bitmain mining SHA-256 algorithm with a maximum hashrate of 319Th/s for a power consumption of 5676W.
For Brand NEW Miner, Bitmain Provides 6 months of factory warranty.
Specifications
| Model | S21 XP Hyd. |
| Crypto algorithm/coins | SHA256|BTC/BCH/BSV |
| Typical hashrate, TH/s(2-1) | 473 |
| Power on wall @35℃(2-2), Watt(2-1) | 5676 |
| Power efficiency on wall@35℃(2-2), J/T(2-1) | 12 |
| Power Supply | |
| Phase | 3 |
| Input voltage, Volt(3-1) | 380~415 |
| Input frequency range, Hz | 50~60 |
| Input max current, Amp | 12 |
| Hardware Configuration | |
| Networking connection mode | RJ45 Ethernet 10/100M |
| Server size (length*width*height, w/o package), mm | 339*173*207 |
| Server size (length*width*height, with package), mm | 570*316*430 |
| Net weight, kg | 13.8 |
| Gross weight, kg | 15.7 |
| Environment Requirements | |
| Inlet coolant temperature, °C | 20~50 |
| Coolant flow, L/min | 8.0~10.0 |
| Coolant pressure, bar | ≤3.5 |
| Working coolant(3-2) | Antifreeze/Pure water/Deionized water |
| Coolant pH value | Antifreeze: 7.0~9.0 Pure water: 6.5~7.5 Deionized water：8.5~9.5 |
| Diameter of coolant pipe connector, mm | OD10 |
| Storage temperature, °C | -20~70 |
| Operation humidity(non-condensing), RH | 10~90% |
Attention:
(1-1) Hash rate values, wall power, and wall power efficiency are typical values. The actual hash value fluctuates ±3%, the actual wall power and wall power efficiency fluctuate ±5%.
(1-2) Water inlet temperature.
(2-1) Note: Incorrect input voltage may cause server damage.
(2-2) Three-phase AC input, maximum 12A.
(2-3) If the inlet water temperature is below 20 °C, the miner cannot be started. For external dry coolers (EC2-DT),
If the outlet temperature is 35°C, the maximum ambient temperature is 30°C;
If the outlet temperature is 45°C, the maximum ambient temperature is 40°C;
If the water temperature is 50°C, the maximum ambient temperature is 45°C.
(2-4) If the conductivity of the water is ≥100 μs/cm, the fluid must be replaced. When the system first ran, the conductivity of the water was less than 20 μs/cm.
Firmware
Additional information
| Coin | BTC+FB+NMC |
|---|---|
| Algo | SHA-256 |
| Hashrate | 473000000000000 |
| Power | 5676 |
| pcname | Bitmain Antminer S21 XP Hyd |
| Voltage | 380~415V |
Reviews
There are no reviews yet.